Ricoh 8025e Operating Instructions Manual page 163

A
Press [Facsimile Features].
B
Press [Administrator Tools].
C
Press [Box Setting].
D
Check that [Program / Change] is selected.
E
Select the box to program.
When programming a new box, press [*Not Programmed].
To change a box already programmed, press it, and then proceed to step
F
Press [Transfer Box].
G
Enter a Box name, and then press [OK].
H
Enter a SUB Code.
To change the SUB Code, press [Clear] or the {Clear/Stop} key, and then try
again. To change Box name, press [Box Name], and then repeat from step
I
Specify the condition of registration.
To program End Receivers, see "Programming End Receivers".
To program a password, see "Programming a password".
J
Press [OK].
K
Press [Exit].
Box Settings
4
H
.
G
.
155