Indicator Display In Normal Mode - Epson Stylus Photo 2100 / 2200 Service Manual

EPSON Stylus PHOTO 2100/2200

1.3.12 Indicator Display in Normal Mode

Table 1-13. Printer Condition and LED Status
Printer status
Power
Power on condition On
Data processing Blink
Ink sequence Blink
Ink cartridge change mode Blink
Ink level low -
Paper out -
Ink end -
Ink color error -
Ink combination error -
No ink cartridge or
-
Ink cartridge error
Double feed error -
Paper jam condition -
Paper gap error -
Cutter jam error -
Release lever position error -
Cutter position error Off
Maintenance request Off
Main board RAM Error On
Fatal error Off
*a : Indicated by all Ink LEDs.
*b : The Ink LEDs corresponding to the cartridge lines A, B, C, D, E, F, G turn
on or blink individually. When viewed from the printer front, the places of
inserting the ink cartridges are lines A, B, C, D, E, F, G from left to right
and correspond to LED1, LED2, LED3, LED4, LED5, LED6, and LED7.
PRODUCTION DESCRIPTION
Indicators
Paper Ink 1 - 7 priority
- - 18
- - 17
*a
- Special blink 16
- - 15
*b
- Blink 14
On - 13
*b
- On 12
High speed
- 11
*b
blink
High speed
- 10
*b
blink
*b
- On 9
On - 8
Blink - 7
On - 6
Blink2 - 5
High speed
- 4
blink
Blink2 Blink2 3
Blink Blink
2
alternately 1 alternately 2
Slow blink Slow blink Slow blink
High speed High speed
1
blink blink
"-" indicates no change.
Blink : Repetition of On 0.5 sec + Off 0.5 sec
Blink 2 : Repetition of On 0.2 sec + Off 0.2 sec + On 0.2 sec +
High speed blink : Repetition of On 0.1 sec + Off 0.1 sec
Blink alternately 1 : Same as blink
Blink alternately 2 : Repetition of Off 0.5 sec + On 0.5 sec
Special blink : TBD
Functions
Off 0.4 sec
Revision A
35