Epson Stylus Photo 2100 / 2200 Service Manual page 192

EPSON Stylus PHOTO 2100/2200
Function Item
EEPROM DUMP This function is used to analyze a faulty product.
function
Paper passing test This function is used to make a reproduction test or
operation check.
Printer information This function is used to analyze a faulty product.
read This function reads and displays the fundamental
information that indicates the operating status of the
printer.
EEPROM reset This function makes a reset that is equivalent to the
EEPROM reset function from the panel.
ADJUSTMENT
Table 5-4. Check Pattern Printing
Purpose
Set and read the corresponding address of the EEPROM. Write the specific
value to the corresponding address as required.
Up to 100 pieces of paper can be set for continuous passage.
• Cumulative print page read
• Cumulative print path read
• Each CL execution count read
• Initial charge execution count read
• Cutter cut count read
The following EEPROM address values are reset.
26<h> − 27<h> Last Cleaninig Time
28<h> − 29<h> Power Off Time
44<h> Interface Selection
Adjustment Items and Overview
Adjustment Outline
Revision A
Used
Tool
Media
Exclusive servicing Non-target
program
Exclusive servicing Non-target
program
Exclusive servicing Non-target
program
Exclusive servicing Non-target
program
192