Ieee-1394 Id Input; First Dot Position Adjsutment (Left/Right Margin Adjustment) - Epson Stylus Photo 2100 / 2200 Service Manual

EPSON Stylus PHOTO 2100/2200

5.2.13 IEEE-1394 ID Input

This function is executed to make this product recognizable in the IEEE-1394
connection environment.
1. Select IEEE-1394 ID input in the adjustment program.
2. Enter the 10-digit code of the IEEE-1394 QR label applied to the rear left side as
seen from the printer front. Enter the IEEE-1394 ID from left to right.
IEEE-1394 QR label
Figure 5-26. QR Label
When replacing the Mechanism, basically peel off the IEEE1394
label carefully from the old Mechanism and apply it to the
position of the new Mechanism shown above.
In the ASP mechanism where the IEEE1394 label is applied in
the specified position, it is also recommended to peel the label of
the old Mechanism and apply it to the specified position of the
ASP mechanism (new Mechanism). If the IEEE-1394 ID code
has changed before and after repair, the printer is recognized as
a new output terminal when it is connected to the user PC, and a
new port driver is generated. In this case, the registry area of the
user PC may be reduced. Therefore, we recommend you to use
the above servicing method.
ADJUSTMENT
Input sequence
5.2.14 First dot position adjsutment (Left/Right Margin
Adjustment)
This function is designed to adjust the print starting position in the CR main scanning
direction.
Though the print starting position in the CR main scanning
direction is fixed to each model, this function is used to make
adjustment only when a complaint is filed in repairing.
1. Choose Left/right margin adjustment in the adjustment program.
2. Click the Print button to print, and determine the correction value in the shifting
direction for the pattern printed on the left margin. Correction can be made in
0.0088mm increments for the correction value of 1.
Adjustments
Revision A
211