Table of Contents
Advertisement
Paper Jams
This section includes:
Preventing and Clearing Paper Jams
■
Paper Jams in the Manual Feeder
■
Paper Jams in Tray 1
■
Paper Jams in the Fuser Unit
■
Paper Jams at the Automatic Document Feeder
■
See also:
Safety Notes
on page 1-2
Preventing and Clearing Paper Jams
To reduce the occurrence of paper jams, follow the guidelines and instructions in
page 5-1. It includes information about supported paper and media, guides for usage, and instructions for
properly loading paper in the tray.
CAUTION:
When removing jammed paper, do not try to remove paper or paper piece deep inside the
machine. Also, do not try to remove paper wrapped around the heat roller. It can cause injury or burn.
Switch off the machine immediately and contact the Fuji Xerox local representative office or an authorised
dealer.
Important:
Fuser is hot. Do not touch areas with labels indicating high temperature and the surrounding
areas. Otherwise, you can get burnt.
Paper Jams in the Manual Feeder
Use the following procedure to clear an error displayed on the printer console.
The error will not clear unless you open and close the front cover.
1.
Pull the jammed paper out of the Manual Feeder. If no jammed paper can be found or it is hard to
remove the paper, go on to the next step.
on page 10-2
on page 10-2
on page 10-5
on page 10-7
on page 10-9
10-2
Paper Jams
Printing Basics
on
Advertisement
Table of Contents
