Printer Console Menus; Power On Wizard; Menu Configuration - Xerox DocuPrint C1190 FS User Manual

Printer Console Menus

This section includes:

Power On Wizard

■

Menu Configuration

■
Changing Menu Settings
■
Power On Wizard
When first turning on the power of the printer, the initial settings menu is displayed on the panel. You can
set the following items with the initial settings.
Panel Language: Use the Panel Language menu to set the language displayed on the printer console.
■
Date
■
Time
■
Networks Setting: Set the following items to connect the printer to the network when you select
■
Panel.
Method of setting IP address
■
IP address of printer
■
Network Mask
■
Gateway Address
■
Set FAX (Basic)?: Set the following items:
■
the name of the country where the printer is used
■
the language to use
■
Fax number
■
Set FAX (Advanced)?: Set the following items:
■
Language
■
Line Type
■
Dialing Type
■
Answer mode
■
Company Name
■
Fax Transmit Report
■
Default Paper Size: Specifies the default paper size.
■
Menu Configuration
The menus that can be accessed by pressing the System button on the printer console are as follows:
Defaults Settings: Use this Defaults Settings menu to define the default Copy, Fax, and Scan settings.
■
Tray Settings: Use the Tray Settings menu to define the print media loaded in each tray.
■
Report/List: Use the Report/List menu to print various types of reports and lists.
■
Meter Readings: Use this menu to display the printed paper counts on the printer console.
■
Admin Menu
■
Phone Book: Use this menu to create/delete address book entries.
■
Print Language: Use this menu to set the print language to PCL print driver.
■
Wired Network: Use this menu to configure the network settings for the printer.
■
Fax Settings: Use this menu to configure default fax settings.
■
on page 9-2
on page 9-2
on page 9-3
9-2
Printer Console Menus