Table of Contents
Advertisement
If "0" is not next to the straightest lines, determine the values and adjust again.
Note:
After printing the Color Registration Chart, do not turn off the printer until the printer motor has
stopped running.
Enabling Automatic Color Calibration
Use the following procedure to automatically calibrate the color when installing a new drum cartridge.
1.
Press the System button to display the System screen.
2.
Press the Up Arrow or Down Arrow button until Admin Menu appears, and then press the OK
button.
3.
Press the Up Arrow or Down Arrow button until Maintenance appears, and then press the OK
button.
4.
Press the Up Arrow or Down Arrow button until Auto Regi Adjust appears, and then press the OK
button.
5.
Select Auto Adjust and press the OK button.
6.
Select Yes to turn automatic color registration on, and then press the OK button.
10-19
Print Quality
Advertisement
Table of Contents
