Table of Contents
Advertisement
Basic Copying
Use either the document glass or the document feeder to make copies. Load the originals to be copied and
follow the steps below to make copies. To clear the settings from the previous job, press the Clear All
button once.
Document Glass
Lift the document feeder or the document glass cover,
and then place the original face down on the back,
left corner of the document glass. Gently close the
cover.
1.
On the printer console, press the Copy button.
2.
Enter the desired number of copies using the printer console keypad. The number of copies appears on
the upper, right corner of the display. To reset the number of copies to 1, press the Clear All button.
3.
Set copying options. See
4.
Press the Start button.
If you placed originals in the document feeder, copying continues until the document feeder is empty.
Note:
Copying cannot be made while printing.
Adjusting Copying Options
6-2
Document Feeder
Insert originals face up with the top of the page
entering the feeder first. Adjust the paper guides so
they fit against the originals.
on page 6-3.
Basic Copying
Advertisement
Table of Contents
