Table of Contents
Advertisement
Safety Notes
Ventilate well during extended operation or mass copying. It may affect the office air environment
due to odor such as ozone in a poorly ventilated room. Provide proper ventilation to ensure the
comfortable and safe environment.
Consumable
Store all consumables in accordance with the instructions given on the package or container.
Do not use a vacuum cleaner for cleaning the spilled toner. Use a broom or a soaked cloth to clean
any spills. Vacuumed toner inside the cleaner can ignite or explode by an electric spark of the cleaner
and may cause an injury.
Never heat the drum, or scratch its surface. Damage to the drum surface can release uncomfortable
fumes which are hazardous to your health.
Keep drum and print cartridges out of reach of children. Should toner be swallowed, spit it out, rinse
mouth with water and drink plenty of water. Consult a physician immediately.
When replacing the drum and print cartridges, be careful not to spill the toner. In case of any toner
spills, avoid contact with skin and clothing, as well as inhalation and contact with eyes and mouth.
In case of any toner spills onto your skin and clothing, wash with soap and water.
Should toner particles get into your eyes, flush with plenty of water for at least 15 minutes until the
irritation is gone. If necessary, seek medical treatment from a doctor.
If toner particles are inhaled, move to a location with fresh air and gargle with plenty of water.
Should toner be swallowed, spit it out, rinse mouth with water and drink plenty of water. Consult a
physician immediately.
Fuser Safety:
When removing the fuser unit, always switch off first and wait for 40 minutes until it cools off.
1-9
Advertisement
Table of Contents
