Table of Contents
Advertisement
Country: Specifies the country where the printer is used.
■
Note:
Country must be set before faxes can be sent.
System Settings
The System Settings menu is used to configure basic printer settings, such as for alarm and Power Saver
mode.
Power Saver Timer: Specifies the transitional time of Low Power Timer and Sleep Timer in
■
increments of 1 minute.
Low Power Timer: 5 min. to 60 min. (default is 5 min.)
■
Sleep Timer: 1 min. to 6 min. (default is 6 min.)
■
For details, refer to
Power Saver Wake Up: Specifies whether or not the printer exits Power Saver mode when the
■
external telephone rings.
OffHook WakeUp
■
On (default): The printer exits Power Saver mode.
■
Off: Select this if you want to have the printer kept in Power Saver mode.
■
Auto Reset: Specifies the time the printer waits for further console input before automatically
■
resetting the settings for COPY, SCAN, or FAX and returning to the standby mode.
Fault Time-out: Specify the time for an automatic timeout for a job fault.
■
Job Time-Out: You can cancel a printing process when it goes beyond a set time period. Set the time
■
until the print job is canceled. When this timeout expires, the print job is canceled.
On: 5 sec. to 300 sec. (default: 30 sec.): Specifies the amount of time in increments of 1 second the
■
printer waits for additional data before it cancels the job.
Off: Cannot cancel.
■
Clock Settings: Specifies the date and time.
■
Set Date
■
Set Time
■
Date Format: Select either yy/mm/dd, mm/dd/yy, or dd/mm/yy.
■
Time Format: 12 or 24 hour formats are available.
■
Time Zone: Set the time zone based on Coordinated Universal Time (UTC) for your location.
■
Alert Tone: Specifies whether to turn on the alarm when an error occurs in the printer.
■
Panel Select Tone (default: Normal)
■
Panel Alert Tone (default: Off)
■
Machine Ready Tone (default: Normal)
■
Copy Job Tone (default: Normal)
■
Non-Copy Job Tone (default: Normal)
■
Fault Tone (default: Normal)
■
Alert Tone (default: Normal)
■
Out of Paper (default: Normal)
■
Low Toner (default: Off)
■
Auto Clear Alert (default: Off)
■
Base Tone (default: Off)
■
All Tones
■
mm / inch: Set the units for the custom paper size to millimeters or inches.
■
Millimeter (mm) (default): The paper size is displayed in millimeters.
■
Inch ("): The paper size is displayed in inches.
■
Power Saver Mode
on page 2-10.
9-12
Description of Menu Items
Advertisement
Table of Contents
