Table of Contents
Advertisement
Copy-Quality Problems
When the copy quality is poor, select the closest symptom from the following table to correct the problem.
If the copy quality does not improve after carrying out the appropriate action, contact the Fuji Xerox local
representative office or an authorised dealer.
Symptom
Lines or streaks only
present in copies made
from the ADF
Spots present in copies
taken from the document
glass
The reverse side of the
original is showing on the
copy
Light colors are washed out
or white on the copy
Image is too light or dark
Reason/Action
There is debris on the document glass. When scanning, the paper from the ADF
passes over the debris creating lines or streaks.
Clean the glass with a lint free cloth.
There is debris on the document glass. When scanning, the debris creates a spot on
the image.
Clean the glass with a lint free cloth.
Copy
On the
menu, enable
For information on turning Auto Exposure on and off, see
page 6-7.
Auto Exposure is enabled.
Copy
On the
menu, enable
For information on turning Auto Exposure on and off, see
page 6-7.
If the copied image is too light or dark, use the
Copy
menu.
For information on making the image lighter or darker, see
or Darker
on page 6-5
10-16
Auto Exposure
.
Auto Exposure
.
Lighten/Darken
Print Quality
Setting Auto Exposure
on
Setting Auto Exposure
on
option on the
Making an Image Lighter
Advertisement
Table of Contents
