Xerox DocuPrint C1190 FS User Manual page 104

Xerox printers user guide
Table of Contents

Advertisement

Selecting the Copy Margins for All Copy Jobs
The System settings menu allows you to select the margins for All Copy Jobs, or individual jobs.To select
the margins for individual jobs, see
Selecting the Top/Bottom Margins
1.
On the printer console, press the System button.
2.
Select Defaults Settings, and then press the OK button.
3.
Select Copy Defaults, and then press the OK button.
4.
Select Margin Top/Bottom, and then press the OK button.
5.
Select the margin that you want to change, and then press the OK button.
6.
Use the Up Arrow or Down Arrow button to adjust the margins, and then press the OK button.
Selecting the Left/Right Margins
1.
On the printer console, press the System button.
2.
Select Defaults Settings, and then press the OK button.
3.
Select Copy Defaults, and then press the OK button.
4.
Select Margin Left/Right, and then press the OK button.
5.
Select the margin that you want to change, and then press the OK button.
6.
Use the Up Arrow or Down Arrow button to adjust the margins, and then press the OK button.
Selecting the Center Margin of the Paper
1.
On the printer console, press the System button.
2.
Select Defaults Settings, and then press the OK button.
3.
Select Copy Defaults, and then press the OK button.
4.
Select Margin Middle, and then press the OK button.
5.
Select the margin that you want change, and then press the OK button.
6.
Use the Up Arrow or Down Arrow button to adjust the center margin, and then press the OK button.
Note:
The margin width is only enabled when copying from the document glass.
Selecting the Margins for Individual Jobs
1.
Place the document to be copied on the document glass.
2.
On the printer console, press the Copy button.
3.
Select the margin setting from Margin Top/Bottom, Margin Left/Right, or Margin Middle, and
then press the OK button.
4.
Use the Up/Down Arrow button to adjust the margin, and then press the OK button.
5.
Repeat the steps 3 and 4 if necessary, and then press the Exit button.
6.
Press the Start button to begin copying.
Selecting the Margins for Individual Jobs
6-9
Adjusting Copying Options
on page
6-9.

Advertisement

Table of Contents
loading

Table of Contents