Last Number Redial; Save Number Redial; Storing Speed Numbers - Vodavi Triad-S 1-2-3 User Manual

56

Last Number Redial

1. Press the SPEED button.
2. Press the pound [#] key. The last number dialed over an
outside line will be automatically redialed.

Save Number Redial

If you wish to save the last number you dialed:
1. After placing an outside call, keep handset off-hook.
2. Press the SPEED button twice.

Storing Speed Numbers

Station Speed numbers can be entered by keyset users. System
Speed numbers must be entered by the first programmed
attendant. If an attendant has not been specified, enter at
Station 100.
1. Press the SPEED button once.
2. Press a desired outside line key, or press the SPEED
button a second time, to select an outside line.
3. Dial the speed bin location.
000 to 019 = Station Speed numbers
020 to 999 = System Speed numbers
4. Dial telephone number, including special codes buttons as
listed in the following:
TRANS - Pulse-to-Tone Switchover
HOLD - Pause
FLASH - Flash
5. Press the SPEED button.
6. Replace the handset or press the ON/OFF button to end
speed dial programming.
For Display Security, press the TRANS button, then
enter the telephone number and any other special
codes buttons as needed.
Speed Dial