Vodavi Triad-S 1-2-3 User Manual page 2

TM
STARPLUS Triad
FIXED FEATURE BUTTONS
• CAMP-ON Button -- Enables you to alert a busy
party that an outside line is on hold and waiting
for them.
• CONF (CONFERENCE) Button -- Used to
establish and build conference calls .
• FLASH Button -- Us ed to terminate an outside
call and restore dial tone without having to
hang up the hands et. It is also us ed to transfer
calls behind a PBX or Centrex within those
sys tems.
• FORWARD (FWD) Button -- Allows you to
forward your calls to another station.
• HOLD Button -- Enables you to place an outside
caller on hold.
• H-T-P Switch -- Allows the user to select the ICM
signaling mode: Handsfree, Tone, or Privacy.
CALL FORWARDING
1. Pres s the FWD button or dial [6 40].
2. Dial the des ired Call Forward code:
[6] = All Calls
[7] = No Answer
[8] = Busy
[9] = Busy/No Ans wer
3. Dial station number where calls are to be
forwarded. Hear confirmation tone.
4. Replace handset or press ON/OFF button.
ESTABLISHING A CONFERENCE
Only stations that have Conference ena bled will be
able to initia te a Conference.
1. Lift the handset.
2. Select intercom station or dial desired outside
party. When called party ans wers, press the
CONF button.
3. Add next conference party by s electing
another outside line or intercom station.
4. Pres s the CONF button again and repeat
previous step in a cycle, until all parties are
contacted.
5. When last party answers , press the CONF
button twice. All parties are connected.
TERMINATING A CONFERENCE
To terminate a Conference, the conference initiator
must be actively in the conference.
Replace handset or press ON/OFF button.
Digital Systems
• MSG (MESSAGE WAIT) Button -- Allows you to
initiate a message waiting indication at stations
that are busy, unattended, or in Do Not Disturb.
Mess age Waiting Callback request left at your
station is indicated by a flashing MSG WAIT LED.
• MUTE Button -- Allows you to switch the built-
in microphone on or off when us ing the
speakerphone, or the handset microphone
when using the hands et.
• ON/OFF Button -- Enables you to make a
te lephone call without lifting the handset. It
turns the telephone on and off when using the
speakerphone.
• SPEED Button -- Provides you with access to
speed dialing, save number redial and last
numbe r redial. This button is also used to
access flexible button programming.
• TRANS (TRANSFER) Button -- Used to transfer
an outside call from one station to another.
• VOLUME BAR -- Allows the us er to adjust
speakerphone and handset volume.
UNSCREENED TRANSFER
1. Press TRANS button and dial station number.
2. When the called extension begins to s ignal,
hang up to transfer the call.
3. Replace handset or pres s ON/OFF button.
SCREENED TRANSFER
While connected to an outside line:
1. Press s tation button where call is to be
tr a ns fe rr e d ( if pr ogr a mm ed on y our
te lephone),
-or-
Press the TRANS button and dial the desired
station number.
(The called extension signals according to the
intercom signal switch position.)
2. When that extension answers , announce the
trans fer.
3. Hang up to complete transfer.
LEAVING A MSG WAITING INDICATION
If you dial a s tation that is busy, unattended, or in
Do Not Disturb, you can leave a message waiting
indication.
1. Press the ON/OFF button.
2. Dial the des ired intercom station. A busy tone
or DND tone is he ard.
3. Press the MSG button. The called party's MSG
button LED will flash slowly.
4. Press the ON/Off button to end the call.
Quick Reference Card