Intercom Buttons - Vodavi Triad-S 1-2-3 User Manual

36
While Headset mode is active, the ON/OFF button will
activate the headset and disable speakerphone and
intercom call announce operation at your station.
To deactivate Headset Mode:
Dial [634] or press the pre-programmed HEADSET MODE
flexible button; LED extinguishes.

Intercom Buttons

To program a flexible button as an intercom button:
1. Press the SPEED button twice.
2. Press the desired flexible button to be programmed.
3. Dial [645]. A confirmation tone sounds.
If an error is made during entry, an error tone is
received.
If an intercom call is placed to a busy station that has
an intercom button:
-
-
The calling station receives ringback tone instead
of busy tone. The called station hears muted or
reminder ring and their intercom button LED
starts flashing at the incoming line rate. This
indicates an incoming intercom call.
The called station can place the current CO call
on hold by pressing the HOLD button, or place
the current intercom call on hold by pressing the
HOLD button. The intercom call would be placed
on hold on the available intercom button.
❑
Flex
Btn
Intercom Buttons