Answering A Meet Me Page; Message Waiting; Answering A Message Waiting; Leaving A Message Waiting Indication - Vodavi Triad-S 1-2-3 User Manual

42

Answering a Meet Me Page

Go to the nearest phone:
Dial [770] or press the pre-programmed MEET ME flexible
button. You will be connected to party that paged you.

Message Waiting

Answering a Message Waiting

If your MSG button LED is flashing at a slow rate, you have a
message waiting for you.
1. Press the flashing MSG button. The station that left the
message will be signaled with tone ringing.
2. If called station does not answer, press the MSG button
once to leave message.

Leaving a Message Waiting Indication

If you dial a station that is busy, unattended, or in DND, you can
leave a message waiting indication.
1. Lift the handset or press the ON/OFF button.
2. Dial the desired intercom station. A busy tone or DND
tone is heard.
3. Press the MSG button, the called party' s MSG button will
flash slowly.
4. Replace handset or press the ON/Off button to end call.
❑
Flex
Btn
The first message left will be the first one called.
Up to five (5) messages can be left at any Key Station.
8-button telephones use [623] to assign a MESSAGE
WAITING button.
Message Waiting