Last Number Redial
At an idle station:
1.
Dial the Keyset Mode code [648] on the dial pad,
-or-
Press the preprogrammed KEYSET MODE button, the following
displays:
2.
Press [ ] to scroll through the keyset modes.
3.
Press [#] to scroll through the baud rates.
4.
Press the HOLD button to save the desired entries.
SINGLE LINE TELEPHONE
Not applicable
Last Number Redial
The Last Number Redial (LNR) feature permits the automatic redialing of
the last telephone number dialed on an outside line. Up to 24-digits can
be stored. Outside line selection of the same line used is automatic.
To use Last Number Redial, either:
Press the preprogrammed LAST NUMBER REDIAL button (code 650 -
this code available only on XTS systems).
-or-
Press the SPEED button, then press [#].
-or-
Use the Soft Key's LNR option when in an idle condition.
-or-
Press the REDIAL button on an IP Phone
I NAC TI VE
MO DE =
S AV E = H O L D B AU D= #
2400
71