System Programming And Verification - Vodavi Starplus Triad-S Installation Manual

System Programming and Verification

System Programming and Verification
System operation should be verified as per the programmed customer
database once all customer database programming is completed. A hard
copy of the customer database can be printed from the system and
should be kept on-site and up to date for future reference.
The
such, feature activation can sometimes be mistaken for improper
operation. First, verify all programmable features are enabled for the
phone or function in question. Then compare the suspected improper
operation with the feature operation description to determine which
feature is causing conflict. Be aware that some features can override
others and take precedence in operational priority. Then make the
necessary programming changes in customer database programming to
acquire the desired operation.
If feature operation is not the cause of the suspected problem, then
general troubleshooting procedures should be employed. Use these
basic guidelines to determine the cause of a reported problem:
1. Verify that system programming is correct and that the suspected
2. Check the installation cabling/wiring and connectors for cuts, shorts
System must be initialized before the customer database is
programmed.
STARPLUS Triad-SSystems are highly-featured digital switches and, as
feature, circuit or function was enabled in programming.
or loose connections.
By verifying correct operation for each segment of the installation
and system, the source of the problem is isolated and can thereby be
identified and resolved.
4-3