Vodavi Starplus Triad-S Installation Manual page 74

Remote System Monitor
3. Enter the specific board, CO line or Station number of the trace
4. Press <Enter> to enable the trace. A screen similar to the following
5. To disable or turn off a particular trace mode, do not enter a specific
S = Station (STA) States (traces events associated with Station
activity)
E = Error Messages (traces error messages)
Q = Queue (QUE) Events (traces queuing events: DTMF receiver,
UCD, LCR, etc.)
D = Device Command (traces commands to peripheral devices)
desired, or type all when all boards, CO lines or Stations events are
desired.
001-012 = CO Line port
100-131 = Station location
All = All Boards, CO lines or Stations
displays:
Figure 4-7: Enable Event Trace
board, CO Line or Station Number (e.g.,t<space>s<return> to
disable station event trace).
4-21