2-6
KSU Installation
The
Mounting the Basic KSU
The Basic KSU consists of a plastic cover, a metal base frame designed for
wall mounting. Before installing BKSU on the wall, two wall mounting
plates that are assembled in the bottom side of the BKSU, must be
extended for mounting. The KSU must NOT be mounted on a masonry or
dry-wall surface; a wooden backboard is required.
A mounting template is included with the BKSU. This template can be
used to drill pilot holes for mounting screws. Please note that the
template provides screw hole locations for the BKSU and EKSU. The BKSU
is mounted with three #10 or larger, 1 1/2 inch or longer screws. Drill pilot
holes in the three locations marked, insert the screws and tighten leaving
about 1/2 inch exposed.
STARPLUS
Triad-S
System consists of a Basic KSU (BKSU) cabinet.
KSU Installation