Programming Caller Id; Smdr - Vodavi Starplus Triad-S Installation Manual

2-30

Programming Caller ID

ICLID Enable
1. Verify the programming for ICLID enable,
2. Press Button [1].
3. Dial [1] on the keypad and press HOLD.
I/O Ports
1. Verify the programming for the I/O ports,
2. Select the I/O port, Button 1, 2 (SIU1, SIU2).
3. Dial [5] on the keypad and press HOLD to select 2400 baud.
CO Lines
1. Verify the programing for the CO lines,
2. Enter the CO line range for the Caller ID Unit.
3. Press HOLD.
4. Press Button [21] (Page C).
5. Press Button [2], ring delay timer.
6. Enter 04 (minimum) and press HOLD.
7. Reset the system and Caller ID Unit.

SMDR

The SMDR feature provides detailed records of all outgoing and/or
incoming, long distance only or all calls. The SMDR Qualification Timer
determines the time needed to determine a valid SMDR call for reporting
purposes. By default, this timer is set to 30 seconds and is variable from
00-60 seconds in one second increments. This feature is enabled or
disabled in system programming. By default, SMDR is disabled and set to
record long distance calls only.
A printout format of 80 characters maximum or 30 characters maximum
may be selected in system programming. The standard format is 80
characters per line. A 30 character format generates three lines per
message.
3226, Flash 56.
✳✳
3226, Flash 15.
✳✳
3226, Flash 40.
✳✳
SMDR