Event Trace Buffer; Event Trace Buffer Commands - Vodavi Starplus Triad-S Installation Manual

4-16

Event Trace Buffer

The Event Trace Buffer is used to store and dump event traces (up to 30)
that occur just prior to a
These can then be reviewed by authorized personnel to aid in system
troubleshooting.
The basic format for the commands are as follows:
Command
t<space> <return>
t<space> 0<return>
t<space> 1<return>
t<space> 2<return>
t<space> 3<return>
d<space> e<return>
d<space> b <return>
r<space> sXXX<return>
r<space> cXXX <return>
STARPLUS
Table 4-7: Event Trace Buffer Commands
Displays the current status of the Event Trace Buffer.
Turns the Trace buffer OFF.
Turns the Trace buffer ON to record events prior to a soft
system reset.
Turns the Trace buffer ON to record events prior to a hard
system restart.
Turns the Trace buffer ON to record events prior to either a soft
reset or a hard system restart.
Dumps Trace Events stored from last system reset (soft or hard).
Permits maintenance personnel to determine the busy status
of all the busy keysets and CO Lines in thesystem,including the
T1 lines.
Permits a specific station to be reset.
Permits a specific CO Line to be reset.
Press the Esc key to abort the Data Dump and return to the maint>
prompt.
Remote Maintenance
Triad-S System soft or hard restart.
Function