Miscellaneous Interface Unit (Misu) Installation - Vodavi Starplus Triad-S Installation Manual

2-18

Miscellaneous Interface Unit (MISU) Installation

The Miscellaneous Interface Unit (MISU) contains the second external
music source (MOH/BGM) and two serial ports.
Installing the MISU
1. Using a grounding strap, unpack the MISU from its anti-static
2. Locate the CN15 connector (outlined) on the MPB.
3. Locate the CN3 connector on the MISU.
4. Position the MISU so that CN3 matches CN15 on the MPB.
5. Push the MISU onto it' s connector making sure it is properly seated.
6. Match the screw hole on the MISU PCB bracket with the screw hole
7. Insert a screw and tighten the screws securely.
conductive bag in the packing box.
on the base frame.
This completes the MISU installation.
When the MISU is installed in the Triad-Sand the system is powered
up with dip switches 6 and 7 in the on position, power up will take
about60 seconds.However,if the dipswitches are off, powerupwill
take only 20 seconds.
Miscellaneous Interface Unit (MISU) Installation