Remote Maintenance
Remote Maintenance
General Overview
The Remote Maintenance feature allows authorized personnel to survey
system, slot configuration information and programming. This can be
done through the optional modem or data terminal connected via the
RS-232C port on the optional MISU Module. The commands are entered
from a keyboard and are limited to those listed.
Overview of Maintenance Commands
There are four basic commands available in the Remote Maintenance
feature. All commands begin with a single character, followed by a space,
another character and an optional digit or digits. All commands are
terminated with the <Enter> key.
Maintenance Password
The Maintenance feature, like Programming, is entered via a six-character
alphanumeric string. The password prompt is given by pressing <Enter>
at the device connected to the RS232 port. After the prompt displays,
enter the password, then press <Enter>. Proper entry of the password
displays the maintenance prompt. The Maintenance password is: CONFIG
4-11