Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Understanding the screens
When the machine is turned on and
operations described below will be entered using the operation panel. For precautions concerning the use of
the touch panel, refer to page 36.
No.
Display
1
2
3
4
5
6
* The keys in the table above appear and can be used in most of the screens described later in this manual.
6
Key Name
Touch this key to cancel all operations previously
Home key
performed and return to the initial pattern group
selection screen.
Pattern display
This area displays the selected pattern.
area
Shows the available embroidering area. The embroidery
Embroidering
frame indications, the grid lines and other display
area line
settings can be specified from the machine settings
screen.
Machine
operations guide
Touch this key to check a machine operation.
key
Touch this key to move or thread a selected needle bar,
Needle bar/Frame
or to position the carriage so the embroidery frame can
move key
easily be removed or attached.
Touch this key to change the embroidery machine
Settings key
settings.
is touched, the pattern type selection screen appears. The
Function
1
2
3
4
5
Reference
p. 218
p. 218
p.230
p.30, 62, 90
p. 216
Turning ON the Machine 41
2
Page
Advertisement
Table of Contents
Troubleshooting
