— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
3
Touch the keys to adjust the pattern to the
desired size.
Each touch of a key slightly enlarges or
reduces the pattern.
The size of the pattern is displayed after a key
is touched to change it.
1 Vertical length
2 Horizontal width
• The size that the pattern can be enlarged
depending on the pattern or character.
• Depending on the pattern or character, if it
is rotated 90 degrees it may be enlarged
even more.
• If the pattern is rotated, the vertical and
horizontal directions may be reversed.
• To return the pattern to its original size,
touch
4
If necessary, touch the arrow keys to adjust
the position of the pattern.
(For more details, refer to page 181.)
5
After making the desired changes, touch
The pattern editing screen appears again.
CAUTION
●
After changing the size of the pattern,
check the icons for the embroidery
frames that can be used and use only
the indicated frames. If a frame other
than those indicated are used, the
presser foot may hit the embroidery
frame and cause injuries.
.
.
Rotating a pattern
The pattern can be rotated between 1 and 359
degrees either clockwise or counterclockwise.
1
Touch
1
2
The screen shown below appears.
Example: Original angle
Editing the Embroidery Pattern (Pattern Editing Screen) 183
.
Rotates 90 degrees to the
right
Rotates 10 degrees to the
right
Rotates 1 degree to the
right
Rotates 90 degrees to the
left
Rotates 10 degrees to the
left
Rotates 1 degree to the
left
5