Basic Procedures - Baby Lock Enterprise BNT10L Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Basic Procedures

Basic embroidering procedures are described below.
Check the overall procedure below, before operating the embroidery machine.
Step
1
2
3
4
5
6
7
8
9
10
11
12
13
14
The operations to embroider the pattern are described on the following pages.
Although embroidering can continue without the pattern being edited or embroidering settings being
specified, refer to page 179 for details on editing the patterns, and refer to page 125 for details on specifying
embroidering settings.
Descriptions of the keys and other information that appear in the main LCD screens are provided in the
tables on pages 71 to 80. Use these tables for quick reference.
The various operating precautions that must be observed during the basic procedures are provided on pages
34 to 36. These precautions must be strictly observed in order for the machine to function properly. Make
sure to read these precautions.
Install the bobbin.
Turn on the machine.
Select an embroidery pattern.
Edit the embroidery pattern.
Specify the embroidering settings.
Check the previewed image.
Hoop the fabric in the embroidery frame.
Attach the embroidery frame to the machine.
Check the embroidery area.
Thread the upper threads.
Unlock the machine, then press the start/stop button to start
embroidering.
(Once embroidering is completed, the machine automatically
stops.)
Check the thread tension.
Remove the embroidery frame, and then remove the fabric from
the frame.
Turn off the machine.
Operation
Operating
Tutorial
Procedure
Reference
Reference
Page
Page
p. 38 p.35
p. 40 p.34, 36
p. 44
p. 46
p. 47
p. 48
p. 49 p. 36
p. 51
p. 53
p. 54 p.36
p. 64
p. 68
p. 69
p. 70
Basic Procedures 37
2