Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
5
Touch
The stitch navigating screen appears.
6
Touch
point on the LCD screen.
The camera view window appears.
• Touch
twice the size of normal view.
7
Touch
two or three stitches.
1 Each touch of this key moves one stitch back
through the stitching.
• Check that the needle drop point is
positioned where stitches have already
been sewn.
Touch
8
.
to check the needle drop
to zoom up the camera view
two or three times to go back
.
9
Touch
The embroidering screen appears again.
0
Touch
stop button to continue embroidering.
Memo
● The machine can be stopped at any time,
even while it is embroidering; however, if
the machine is stopped when the thread
color is changed, it is not necessary to go
back through the stitching when
embroidering is continued. The machine
can also be set to stop when the thread
color is changed. (For details, refer to
"Setting the Machine to Stop at Color
Changes" on page 140.)
1
Resume Embroidering After Turning Off the Machine 121
.
, and then press the start/
3
Advertisement
Table of Contents
Troubleshooting
