Reserved Needle Bar And Sewing Speed Settings - Baby Lock Enterprise BNT10L Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Reserved Needle Bar and Sewing Speed Settings

Normally, the machine automatically assigns thread colors to the needle bars; however, a specific thread
color can be manually assigned to a certain needle bar. If a needle bar is specified, that needle bar is
removed from the machine's automatic assignments and the specified color remains assigned to it.
By specifically assigning often used thread colors to certain needle bars, the trouble of changing the thread
spools can be reduced.
Also, the maximum sewing speed can be specified to the assigned needle bar. It is useful when you specially
set a weak thread such as a metallic thread to the assigned needle bar.
● This feature is not accessible through the embroidering screen.
● You can assign thread colors up to 9 needle bars in normal mode. When you set "Manual Color
Sequence" to "ON" in settings screen, it is available to assign up to 10 needle bars. If you assign all
the 10 needle bars in the "Manual color sequence" mode, and then you set the machine to the
normal mode, the setting of needle bar 10 is canceled automatically.
Sequence)" on page 132
Once a manual needle bar setting is specified, it
remains applied until the setting is cancelled.
The manual needle bar settings can be specified in
page 3/5 of the settings screen.
1 Touch
screen.
Note
Refer to "Selecting/Managing Thread Colors for Each Needle Bar (Manual Color
, and then touch
to display page 3/5 of the settings
2 Touch any of the key from
number of the needle bar that you wish to
specify.
and
1 Indicates the number of the selected needle bar

Reserved Needle Bar and Sewing Speed Settings 145

to for the
1
4