Table of Contents
Advertisement
APPENDIX
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
The selected pattern is going to be
deleted because
was
touched.
was touched while thread
colors were being changed.
296
The image is going to be deleted.
A saved combined pattern is being
rotated in the embroidering
settings screen.
Color sorting for the combined
border pattern will be canceled
when
is touched. In
addition, the thread marks will be
removed even if they have been
set.
The machine was turned off while
sewing, then turned on again.
Touch
to return the
machine to the condition (pattern
position and number of stitches)
when it was turned off. Follow the
procedure described in "Resume
Embroidering After Turning Off the
Machine" on page 120 to align the
needle position and sew the
remainder of the pattern.
The thread picker did not operate
correctly.
Remove the thread entangled on
the thread picker.
Advertisement
Table of Contents
Troubleshooting
