Baby Lock Enterprise BNT10L Instruction And Reference Manual page 254

APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
a Touch , then the machine starts to
detect the location of the embroidery
positioning sticker.
When the machine's built-in camera has
b
finished detecting the location of the
embroidery positioning sticker, the following
message appears. Touch
Note
● If the built-in camera cannot detect the
location of the embroidery positioning
sticker, the following error message
appears. Touch
frame to its previous orientation, and then
perform the procedure again starting from
8
step .
c
Remove the embroidery positioning sticker
from the fabric.
252
d
.
e
f
, return the jumbo
Touch to select the next section of
the pattern to be embroidered, and then
touch .
Touch .
Touch , and then press the start/
stop button to start embroidering the next
section of the pattern.