Baby Lock Enterprise BNT10L Instruction And Reference Manual page 167

Hide thumbs Also See for Enterprise BNT10L:
Table of Contents

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ About embroidery card reader (optional) and
USB card writer module*
• Use only an embroidery card Reader
designed for this machine. Using an
unauthorized embroidery card Reader may
cause your machine to operate incorrectly.
● Embroidery patterns cannot be saved from
the machine to an embroidery card
inserted into a connected USB card writer
module*.
* If you have purchased the Palette Ver5 or
■ Using embroidery card reader
When using the embroidery card reader,
carefully support the embroidery card reader
near the operation panel.
1
Plug the optional embroidery card reader/
USB card writer module* into the primary
(top) USB port on the machine.
1 Primary (top) USB port
2 Embroidery card reader/USB card writer
module*
* If you have purchased the Palette Ver5 or later,
Palette petite or Palette PTS, you can plug the
included USB card writer module into the
machine as an embroidery card reader, and
recall patterns.
When connecting the USB card reader/writer
to the machine's USB port, be sure to secure
the cable with the two hooks on the back
panel. If the cable is not secured, the
embroidery frame may catch on the cable
while the frame is moving, causing the
pattern to become misaligned.
Note
later, Palette petite or Palette PTS, you can
plug the included USB card writer module
into the machine as an embroidery card
reader, and recall patterns.
2
Insert the card completely into the card
reader/USB card writer module*.
• Insert the embroidery card so that the end
with a printed arrow is facing up.
Note
● Two embroidery USB card readers/USB
card writer module* cannot be used with
this machine at the same time. If two
embroidery USB card readers/USB card
writer module* are inserted, only the
embroidery USB card reader/USB card
writer module* inserted first is detected.
● If an embroidery card other than our
original embroidery cards are used, the
embroidery machine may not operate
correctly. Be sure to use only
recommended embroidery cards.
● Some licensed or copyright cards may not
be compatible with this embroidery
machine.
Memo
● You can also plug the embroidery card
reader/USB card writer module* into the
center port of the machine.
Selecting an Embroidery Pattern 165
5

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Enterprise bnt10

Table of Contents