Draytek Vigor2130 Series User Manual page 86

Type
WPA Algorithm
Server IP Address
Destination Port
Shared Secret
WPS
WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection
between wireless station and wireless access point (vigor router) with the encryption
of WPA and WPA2.
Configure via Push Button Click Start PBC to invoke Push-Button style WPS setup
The WPA encrypts each frame transmitted from the radio
using the key, which either PSK (Pre-Shared Key) entered
manually in this field below or automatically negotiated
via 802.1x authentication. Select WPA, WPA2 or Auto as
WPA mode.
Choose the WPA algorithm, TKIP, AES or Auto.
Enter the IP address of RADIUS server.
The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
The RADIUS server and client share a secret that is used
to authenticate the messages sent between them. Both
sides must be configured to use the same shared secret.
procedure. The router will wait for WPS requests from
wireless clients about two minutes. The WPS LED on the
78
Vigor2130 Series User's Guide