Draytek Vigor2130 Series User Manual page 31

P P T P / L
P P T P /
if you click PPTP/L2TP as the protocol, please manually enter the Username/Password
provided by your ISP and all the required information.
User Name
Password
Server Address
WAN IP Network Settings You can choose Static IP or DHCP as WAN IP network setting.
IP Address
Subnet Mask
Redial Policy
Idle Time Out
MTU Size
Enable
Vigor2130 Series User's Guide
2 T P
L 2 T P
Assign a specific valid user name provided by the ISP.
Assign a valid password provided by the ISP.
Specify the IP address of the PPTP server.
Type the IP address if you choose Static IP as the WAN IP
network setting.
Type the subnet mask if you chose Static IP as the WAN IP.
If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand.
Set the timeout for breaking down the Internet after passing
through the time without any action. The unit is seconds. The
range is XX ~ XX.
It means Max Transmit Unit for packet. The default
setting is 1442.
The router will detect the MAC address automatically. Or,
check the box to enable MAC address cloning.
23