Remote Access Control - Draytek Vigor2130 Series User Manual

4 . 7 . 1 R e m o t e
4 . 7 . 1 R e m o t e
Enable the necessary VPN service as you need. If you intend to run a VPN server inside your
LAN, you should enable IPSec VPN Pass-through and specify an IP address to allow VPN
tunnel pass through.
Enable IPSec VPN Service
Enable IPSec VPN
Pass-through (Server inside
your LAN)
Enable PPTP VPN Service
Enable PPTP VPN
Pass-through (Server inside
your LAN)
Vigor2130 Series User's Guide
A c c e s s C o n t r o l
A c c e s s C o n t r o l
If this checkbox is checked, the system firewall will allow
VPN (IPSec) remote access from WAN side to the router.
If this checkbox is checked, the system firewall will allow
VPN (IPSec) remote access from WAN side to a VPN
device on the LAN. Type the IP address of the VPN
device in the field next to the checkbox.
If this checkbox is checked, the system firewall will allow
VPN (PPTP) remote access from WAN side to the router.
IP Address range for PPTP client – Specify an IP
address pool for the local private network that will be
assigned to PPTP clients. Note the values given here
should not be the same as IP address range for DHCP
Client.
IP Address range for DHCP client – Display the range
of IP address assigned by DHCP server.
If this checkbox is checked, the system firewall will pass
VPN (PPTP) remote access from WAN side to a VPN
server in the LAN. Type the IP address of the VPN server
in the field next to the checkbox.
167