Draytek Vigor2130 Series User Manual page 163

Ethernet Type Value
If you choose VLAN ID as QCE Type, you have to type the ID number for it and specify
traffic class from Low, Normal, Medium and High.
If you choose TCP/UDP Port as QCE Type, you have to type the port number for it and
specify traffic class from Low, Normal, Medium and High.
TCP/UDP Port
TCP/UDP Port Range
If you choose DSCP as QCE Type, you have to type value for it and specify traffic class
from Low, Normal, Medium and High.
Vigor2130 Series User's Guide
Either 8~63 ASCII characters, such as 012345678(or 64
Hexadecimal digits leading by 0x, such as "0x321253abcde...").
Click Single or Range. If you select Range, you have to type
in the starting port number and the end porting number on
the boxes below.
Type in the starting port number and the end porting number
here if you choose Range as the type.
155