Draytek Vigor2130 Series User Manual page 122

P P P o E
P P P o E
To choose PPPoE as the accessing protocol of the internet, please select PPPoE from the
Internet Access menu. The following web page will be shown.
Username
Password
Redial Policy
Idle Time Out
MTU Size
Mode
Ping IP
Enable/Disable
Clone MAC Address
Type in the username provided by ISP in this field.
Type in the password provided by ISP in this field.
If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand.
Set the timeout for breaking down the Internet after passing
through the time without any action. When you choose Connect
on Demand, you have to type value here.
It means Max Transmit Unit for packet. The default setting is
1442.
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose ARP
Detect or Ping Detect for the system to execute for WAN
detection.
If you choose Ping Detect as detection mode, you have to type
IP address in this field for pinging.
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
114
Vigor2130 Series User's Guide