Draytek Vigor2130 Series User Manual page 30

If your ISP provides you the PPPoE connection, please select PPPoE for this router. The
following page will be shown:
User Name
Password
Redial Policy
Idle Time Out
MTU Size
Enable
Clone MAC Address
After finishing the settings here, please click Next.
Assign a specific valid user name provided by the ISP.
Assign a valid password provided by the ISP.
If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand.
Set the timeout for breaking down the Internet after passing
through the time without any action. The unit is seconds. The
range is XX ~ XX.
It means Max Transmit Unit for packet. The default
setting is 1442.
The router will detect the MAC address automatically. Or,
check the box to enable MAC address cloning.
It is available when the box of Enable is checked. Click Clone
PC Address. The result will be displayed in the field of MAC
Address.
22
Vigor2130 Series User's Guide