Draytek Vigor2130 Series User Manual page 43

D H C P
D H C P
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet.
If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for
your router automatically. It is not necessary for you to assign any setting,
Router Name
Mode
Ping IP
Clone MAC Address
After finishing all the settings here, please click OK to activate them.
Vigor2130 Series User's Guide
Type in a name for the router. It must be the same as the name
used in Syslog.
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose ARP
Detect or Ping Detect for the system to execute for WAN
detection.
If you choose Ping Detect as detection mode, you have to type
IP address in this field for pinging.
It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
35