Draytek Vigor2130 Series User Manual page 211

ACS Settings
CPE Settings
Periodic Inform Settings
Vigor2130 Series User's Guide
Such data must be typed according to the ACS (
Configuration Server) you want to link. Please refer
to VigorACS user's manual for detailed information.
URL - Type the URL for VigorACS server.
If the connected CPE needs to be authenticated, please
set URL as the following and type username and
password for VigorACS server:
http://{IP address of
VigorACS}:8080/ACSServer/services/ACSServlet
If the connected CPE does not need to be authenticated
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSServ
let
Username/Password - Type username and password for
ACS Server for authentication. For example, if you want
to use such CPE with VigorACS, you can type as the
following:
Username: acs
Password: password
Such information is useful for Auto Configuration
Server.
Enable/Disable – Allow/Deny the CPE Client to
connect with Auto Configuration Server.
Port – Sometimes, port conflict might be occurred.
To solve such problem, you might change port
number for CPE.
Disable – The system will not send inform message to
203
Auto