Draytek Vigor2130 Series User Manual page 185

SSID Broadcast
SSID
Isolate
Wireless Mode
Country Region Code
Channel
Tx Power
Enable Green AP
Encryption
W i r e l e
W i r e l e
For the security of your system, choose the proper encryption for data transmission. Different
encryption mode will bring out different setting encryption ways.
Vigor2130 Series User's Guide
Choose Show to make the SSID being seen by wireless clients.
Choose Hide to prevent from wireless sniffing and make it
harder for unauthorized clients or STAs to join your wireless
LAN.
It means the identification of the wireless LAN. SSID can be
any text numbers or various special characters. The default
SSID is "DrayTek". We suggest you to change it.
Check this box to make the wireless clients (stations) with
the same SSID not accessing for each other.
Choose the wireless mode for this router. At present, only
802.11B/B/N mix is available.
It represents different country region code.
Use the drop down list to choose the one that fit the usage of
regulations locally.
It means the channel of frequency of the wireless LAN. The
default channel is 11. You may switch channel if the selected
channel is under serious interference. If you have no idea of
choosing the frequency, please select Auto to let system
determine for you.
Set the power percentage for transmission signal of access point.
The greater the value is, the higher intensity of the signal will
be.
Such function is used to reduce the power consumption (Green
AP) for the access point. When there is no station connected,
the power consumption of access point will be reduced.
Select an appropriate encryption mode to improve the security
and privacy of your wireless data packets.
Each encryption mode will bring out different web page and ask
you to offer additional configuration.
s s S e c u r i t y C o n f i g
s s S e c u r i t y C o n f i g
u r a t i o n
u r a t i o n
177