Table of Contents
Advertisement
2 Align the OmniAccess AP60/61 mounting slots to capture
the surface screws.
F
IGURE
3 Secure the OmniAccess AP60/61, if desired.
To prevent the unauthorized removal of the OmniAccess AP60/61 from its
installed location, use a Kensington MicroSaver Security Cable (not included).
Wrap the security cable around an immovable object, insert the cable's lock
into the Kensington Security Slot on the back of the OmniAccess AP60/61, and
turn the key.
4 Orient the antennas.
For best performance, swivel the individual antennas (OmniAccess AP60) or
antenna array (OmniAccess AP61) so that they are oriented vertically (see
Figure 3-1
on
page
cables (see instructions on
3-4 Hanging the OmniAccess AP60/61 on Screws
26). Once mounting is complete, connect the required
page
32).
Chapter 3
AP Deployment
31
Advertisement
Table of Contents
