OmniAccess AP60/61: Installation Guide
AP Provisioning
AP Provisioning is useful for brand new APs with default configurations. To
perform AP Provisioning from the GUI:
Maintenance > Program AP
1. Go to
On this window, there are two tabs:
Provisioning tab is selected by default.
2
Configure the APs Subnet and Netmask.
This is the subnet from which the AP gets an IP during provisioning. (This is not
the IP address the AP will use when deployed.)
3
Select the Port or Port range for provisioning.
To set the Port Range, select the first and the last ports of your range. All the
ports in between are automatically selected. (Ports have to be sequentially
assigned.)
4
Enter the required information and click
displays.
12
Part 031643-00 Rev. 01
F
2-1 Provisioning Tab
IGURE
.
Provisioning
and
Enable
.The Port Range screen
Reprovisioning
. The
June 2005