Table of Contents
Advertisement
OmniAccess AP60/61: Installation Guide
Mounting Slots
1
The keyhole-shaped slots on the back of the chassis are used for mounting the
OmniAccess AP60/61.
2
Air Vents
These vents promote proper air circulation for cooling the device. Do not allow
these vents to be obstructed by mounting equipment, network cables, or any
other material.
3
Fold-Out Stand
This fold-out stand allows the OmniAccess AP60/61 to be stood upright on a
table or shelf.
4
Kensington Security Slot
This slot is compatible with a Kensington MicroSaver Security Cable (not
included) which can be used to prevent the unauthorized removal of the
OmniAccess AP60/61 from its installed location. To secure the OmniAccess
AP60/61, wrap a security cable around an immovable object, insert the cable's
lock into the Kensington Security Slot, and turn the key.
N
—The serial number and model number are on the bottom of the unit.
OTE
6
Part 031643-00 Rev. 01
June 2005
Advertisement
Table of Contents
