Logging Out - Teledyne 4060 Series Instruction, Operating And Maintenance Manual

Series 4060
<UP/DOWN >Use the UP/DOWN keys to change the letters to the new
password.
<Enter> Press <Enter> to advance to the next letter
<Enter> The last <Enter> moves to the REPEAT PASSWORD
ENTRY screen.
<Escape> Steps back to the previously entered letter or, if on the
first letter, returns to the CHANGE PASSWORD menu.
REPEAT PASSWORD ENTRY SCREEN
________________________________________________
________________________________________________
Note that the new password has been replaced by 'A' as placeholder
characters. This is to ensure that the wrong password is not mistakenly
entered.
<UP/DOWN >Use the UP/DOWN keys to reenter the letters of the new
password.
<Enter> Press <Enter> to advance to the next letter
<Enter> If the repeated password matches the previously entered
new password, the new password is set, the 4060 resumes
the ANALYSIS SCREEN after displaying a brief
message 'Password Changed'.
<Escape> Steps back to the previously entered letter or, if on the
first letter, returns to the CHANGE PASSWORD menu.
Note: If you log off the system using the LOGOUT function in the
MAIN MENU, you will now be required to reenter the
password to gain access to most menus.

4.6.18 Logging Out

The LOGOUT function provides a convenient means of leaving the
analyzer in a password protected mode without having to shut the
Teledyne Analytical Instruments
Reenter a new Password
'A' 'A' 'A'
Operation
61