Command Summary - Teledyne 6200A Manual

TAI Model 6200A SO
Table 6-6: RS-232 Terminal Mode Editing Keys
Key
CR (carriage return)
BS (backspace)
ESC (escape)
Control-R (ASCII 18 decimal)
Control-E (ASCII 5 decimal)
Commands are not case-sensitive; you should separate all command elements (i.e. keywords, data
values, etc.) by spaces.
Words such as T, SET, LIST, etc. are called keywords and are shown on the help screen in
uppercase, but they are not case-sensitive. You must type the entire keyword; abbreviations are not
accepted.
Typing "?" followed by Return or Enter will cause a help screen to be displayed.

6.8.2 Command Summary

The information contained in the rest of this section covers all of the normal commands that are
required to operate the instrument from a remote terminal. If you are going to be writing computer
programs to communicate with the 6200A (i.e., operating the port in COMPUTER MODE) we
suggest that you order a supplementary manual "The RS-232 Interface". This manual shows
additional features of the port designed to support a computer driven interface program.
Analyzer Operator Manual, 02164, Rev. G
2
Function
Execute command
Backspace one character to the left
Erase entire line
Recall previous command
Recall and execute previous command
OBTAINING HELP
6-13