Teledyne 6200A Manual page 162

TAI Model 6200A SO
Table 9-5: Model 6200A Variables
No. Name
0 DAS_HOLD_OFF
1 TPC_ENABLE
2 RCELL_SET
3 IZS_SET
4 DYN_ZERO
5 DYN_SPAN
6 RS232_MODE
7 CLOCK_ADJ
Analyzer Operator Manual, 02164, Rev. G
2
Default
Units
Value
MIN 15.0
ON
o
C 50
°C 50
OFF
OFF
Bit Field 8
Sec. 0
9-19
Value
Description
Range
0.5-20.0 Hold off duration after
calibration or diagnostic
mode.
ON-OFF Temp/Pres compensation
enable
30-70 Reaction cell temperature set
point
30-70 IZS temperature set point
OFF/ON Enable to adjust zero
calibration through remote
contact closure
OFF/ON Enable to adjust span
calibration through remote
contact closure
0-99999 Value is SUM of following
decimal numbers:
1= enable quiet mode
2= enable computer mode
3= enable security feature
4= enable front panel RS-
232 menus
± 60 Real-time clock adjustment