Teledyne 6200A Manual page 103

Trs analyzer
Table of Contents

Advertisement

TAI Model 6200A SO
In all of the commands, brackets ([ ]) denote optional parameters. The ID parameter is the
instrument ID, useful when the multi-drop protocol is being used. The NAME parameter is the
data channel's name. It must be enclosed in quotes (i.e. D PRINT "CONC").
The RECORDS parameter of the REPORT command indicates how many records from the most
recent record and prior to print. If the RECORDS parameter is not specified, all of the records
are printed. The COMPACT and VERBOSE parameters of the REPORT command specify the
report format.
RS-232 Reports
There are two basic kinds of RS-232 reports: data channel summary report, and data reports.
Data Channel Summary Format:
When you press the PRNT button in the data channel edit menu, a report like the following is
printed on the RS-232 channel:
SETUP PROPERTIES FOR CONC:
NAME:
CONC
EVENT:
ATIMER
STARTING DATE:
SAMPLE PERIOD:
REPORT PERIOD:
NUMBER OF RECORDS: 800
RS-232 REPORT:
COMPACT REPORT: OFF
CHANNEL ENABLED: ON
CAL. HOLD OFF:
PARAMETERS:
PARAMETER=CONC1, MODE=AVG, PRECISION=1
In this example, the data channel's NAME property is "CONC"; the EVENT property is
ATIMER; the PARAMETERS property is 1 (indicating a single parameter); the NUMBER OF
RECORDS property is 800, and the RS-232 REPORT property is ON. The list of parameters
and their properties is also printed. Each data channel stores its data in a separate file in the
RAM disk, and this property shows the file name.
Analyzer Operator Manual, 02164, Rev. G
2
25-JUL-96
000:00:01
000:00:05
ON
ON
1
6-22

Advertisement

Table of Contents
loading

Table of Contents