Mitel 3000 Installation And Maintenance Manual page 89

Mitel 3000
Installation & Maintenance Manual
Programming the Directory Service on
From the Programming extension, press the PROGRAM key.
1. Press the Scroll Down key ( ) until "System Programming" is displayed.
2. Select "System Programming".
3. Enter the System Programming Password and select "System".
4. Press the Scroll Down key ( ) until "Dial Name Directory" is displayed.
5. Select the "Dial Name Directory On" option.
To program the names in the Directory table
From the Programming extension, press the PROGRAM key.
1. Press the Scroll Down key ( ) until "System Programming" is displayed.
2. Select "System Programming".
3. Enter the System Programming Password and select "System".
4. Press the Scroll Down key ( ) until "Dial Name Directory" is displayed.
5. Select the "Directory Table" option.
6. Select the extension and enter the name.
Use the keypad to enter the last name using 2 to enter A, 22 to enter B etc. A maximum of ten letters can be
entered for each name. Full names need not be entered. Matching will take place on the number, from one to ten,
of the letters entered.
NOTE: Although the names are entered using the code 2 for A, 22 for B etc the matching is done using 2 for A, B
and C, 3 for D, E and F etc.
84