Hot Swapping Faulty Modules - Mitel 3000 Installation And Maintenance Manual

Mitel 3000
Installation & Maintenance Manual

Hot swapping faulty modules

The CO Line Modules can be replaced without powering the system down.
•
The CO Line Modules can be removed and replaced without powering down the system.
•
The Expansion Modules cannot be removed and replaced without powering down the system.
•
The Voice Module can be removed and replaced without powering down the system.
When a Voice module is replaced, all recorded messages and greetings are lost. If a
Voice module is removed and reinserted, the messages and greetings are retained.
•
The Broadband Module cannot be removed and replaced without powering down the system.
•
The T1/E1 PRI Module can be removed and replaced without powering down the system.
If there are calls in progress on a PRI Interface when the T1/E1 PRI Module is
reinserted it can take up to 90 seconds for the network to return the line to service.
48